This kind of floating seal usually install on bottom

0 امتیاز
سوال شده 12 شهریور 1398 توسط heauiting (280 امتیاز)
Description:
This kind of floating seal usually install on bottom roller/carrier roller/front
idler/sprocket of Excavator,the assembly of a floating seal is made up of two matching halves,each half has a metal ring and a rubber ring,which acts as secondary sealing element.

Detailed Description:
JB5720 is regular size ,metal face seal is designed to survive in most extreme conditions,so it is important for the quality of floating seal,our products should be inspected by three times,every step must be checked by a inspector,the life span of our products can be over 5000HURS.
Properties:
Part NoOutside DiameterInside DiameterHeightHRCWorking Surface FlatnessWorking Surface RoughnessRaw Material
JB5720277.4mm250mm43mm58-62≤3μm≤0.8μm100Cr6
Checking Step:
First step:
Second step:
Third step:Metal Face Seal manufacturers
website:http://www.floating-seal.com/metal-face-seal/

لطفا وارد شده یا عضو شوید تا بتوانید سوال بپرسید

معرفی نرم افزارهای مشابه ایرانی: سلام، بیسفون، ساینا، افسران درنیان، لنزور، ویسگون، انار، ابرک و....

سوالات مشابه

0 امتیاز
0 پاسخ
سوال شده 5 فروردین 1398 توسط daonan (300 امتیاز)
...