|Parameters of CNC Router|
ModelUC-481 auto loading & unloading
X-Y-Z axis working area1220x2440x200mm
X-Y movementrack and pinion,gear drive/Taiwan
Z movementball screw drive/Germany
Guidelinear 25 square/Taiwan
Spindle power9.6kw Italy HSD(ISO30,fan cooling ATC)
Inventer power11kw Delta
Tool magazine10 pcs tools,carousel type
Drive motor850W Japan Yaskawa servo motor
Command codeG code
Computer interfaceUSB 2.0
Packing dimensions10350mm x 2300mm x 2300mm,4000kgs
Standard enquipment included1.Auto oil lubrication system
3.Vacuum table with 4KW Becker pump
1. cnc machining center automatically loads a 4x8 sheet from a pallet by way of a scissor lift located at the rear of the CNC machine.
2. A movable gantry system equipped with suction cups using retractable guide rails and stops on the table safely and accurately guides the material sheet onto the CNC platform.
3. Once the sheet is placed, the vacuum hold down automatically and operator starts the cut cycle for the CNC to execute.
4. After the sheet is fully processed, it is then pushed off to a conveyor table at the front end while another sheet is simultaneously loaded from the rear of the machine again.
5. During this whole process the residual dust or chips that are not picked up from the dust collector are swept off the table and conveyor into various chutes keeping the work cell clear of dust and debris.
6. Upon completion, the individual parts are labeled by the operator through an integrated bar code system. This facilitates clear identification of the finished parts for quick and easy assembly later on.Auto Loading Cnc Router China